Octave stretch — where it appears
Named by 13 essays across 3 fields — each of them below, with the objects they name alongside it.
The octave that is not two to one
The octave is the one interval nobody argues about: two to one, exact, in every tradition that has one. Asked to set an octave by ear, listeners set it wide — and they do it with pure tones, which have no partials to beat against each other. Whatever is stretching the octave, it is not the stiffness of a piano string.
A tuning is not a table of cents
Two instruments of a pair are tuned deliberately apart, and the tuner has to choose between a fixed number of cents and a fixed number of beats — which differ by a factor of sixteen across four octaves and cannot both be held. A list of pitches records the first, cannot record the second, and cannot record at all that there are two instruments.
The setting is not the preference
Every published number for an interval listeners prefer — the pure third a quartet is said to find, the raised leading note, the harmonic seventh — is a value somebody adjusted until it sounded right. A listener adjusting inside a key is adjusting through the posterior computed just before, so the value they stopped at is not the one they preferred: it is the one whose heard size equals it. On quarter-second notes the correction for a pure major third is 12.8 cents, which is nearly a syntonic comma and is larger than the 13.7-cent preference it corrects.
A firm touch buys beats until the aftersound sinks with it
A piano string decays twice, and a mistuned octave's countable beats were found to rise with how hard the note is struck — on the assumption that the aftersound always starts twenty decibels below the strike. It need not. The moment the count shuts is set by the level the aftersound starts at and nothing else, so a harder strike buys beats only if its aftersound does not sink with it. If the drop deepens by more than 0.85 decibels for each decibel of strike, the firm touch costs beats instead.
A stiff string slows the fourths and quickens the fifths
Every rate in a bearing plan is computed from whole-number partials, and a piano string's partials are not whole numbers. The correction is usually summarised as 'every real beat is faster than the table'. It is not: stiffness quickens the beat of every narrow interval and slows the beat of every wide one, and on a small upright the tempered fourth stops beating altogether. Both errors push the same way, so a tuner who counts the printed table leaves every interval wide, and a fifth and a fourth counted that way make an octave stretched to the 4:2 type or a little past it.
The fourth–fifth check cannot hear the note it checks
A tuner tests a temperament by sounding the fourth below a note and the fifth above it, inside one octave, and comparing their beats. Both beats run to the same partial of the middle note, so moving that note speeds or slows both together and leaves their difference untouched. The check is a test of the octave, and of one particular octave: the 4:2. Measured with each note's own stiffness, the printed table laid fourth first builds exactly that octave on any piano; laid fifth first it overshoots, and the check pulls it back by a third of a cent.
The thirds and the fourths check different octaves
Every interval counted to its printed beat rate on a stiff string is left wide, by an amount set by the squares of the partial numbers that meet in it. Add the links of a chain and the sum lands on an octave type: a fourth and a fifth make the 4:2, a minor third and a major sixth make the 6:3, and three major thirds come just short of the 6:3. So the two most familiar checks in a bearing are exact tests of two different octaves, and on a stiff piano no octave passes both. Each fails on the other's octave by a beat a second at A3.
The octave that fails both checks least
A tuner who cannot pass both the fourth–fifth check and the third–sixth check settles on an octave that fails them equally, and a listener compares beat rates by ratio. Weighed that way, the compromise sits a ninth of the way from the 4:2 octave to the 6:3 on every note of every piano, because the fourth beats twelve times slower than the minor third and that ratio belongs to equal temperament, not to the strings. On a grand both checks then pass to a fifteen-per-cent ear up to middle C, and above it no octave passes both.
The progression of thirds votes for the bearing, not the octave
Added as a third vote beside the two contiguous checks, the progression of thirds was expected to push a stiff piano's octave wider. It pulls it narrower, because the octave it asks for is not set by the strings at all: it is whatever stretch the bearing already carries, plus an eighth of a cent. In an equal bearing that drags the compromise back onto the 4:2 and costs the top of the bearing its pass; give the bearing a fifth of the octave's own stretch and the third vote falls silent.
A bearing counted correctly is stretched by its route, not its strings
A tuner who sets a temperament octave by counting each fourth and fifth to its printed beat rate leaves every one of them a little wide on a stiff string, and the bearing ends up carrying a stretch nobody chose. Whether that stretch is enough to quiet the progression of thirds across the octave's edge turns out to be the wrong question. The stretch belongs to the order of the plan, not to the piano: one ordinary plan carries five times what the progression needs, another a fraction. And either plan leaves the thirds inside the bearing beating in a zigzag, faster then slower then faster, by up to eighteen per cent a step on a grand — which is why the thirds have to set the bearing rather than check it.
A bearing set by its thirds carries five eighths of its octave
A bearing counted from the printed fourths and fifths leaves its thirds zigzagging round the printed progression and takes whatever stretch its route gives it. Set the other way — every note solved at once so that each major third beats faster than the one below by exactly the printed step — the bearing bends smoothly upward and carries 63 per cent of its octave's own stretch, on a grand, on an upright and on everything between. That is more than three times what the octave's three checks need in order to agree, so following the thirds reconciles them with room to spare. The price is paid by the fourths and fifths, every one of which then beats slow.
A stiff string gives the bearing a comma of its own
The twelve fourths and fifths inside a piano's temperament octave are not twelve checks. Laid end to end they are one closed circle, and on stiff strings their printed rates fail to close it by 2.22 cents. Every disagreement between a bearing's tests follows from that one number: which interval never gets counted decides the stretch, and the zigzag in the thirds is the seam. Spread it round the circle and every fourth and fifth beats nine per cent slow of the table, and the thirds come right without being asked.
One walk round the bearing measures the piano and the tuner together
A tuner who counts twelve fourths and fifths to the printed table and comes home flat has measured something. Divide the closing beat's rate by three and correct the whole table by that share, and the worst interval improves from a hundred per cent off to about twenty, on any piano. It keeps the table with one number. And the number cannot tell a stiff string from a slow count: a tuner counting nine per cent slow gets the right bearing from the wrong table, and one correction removes that luck along with the error.
Named alongside it
The objects these essays reach for when they reach for this one.
BeatingInharmonicityTuning by earEqual temperamentTemperamentPianoPartialCentsWeber fractionDecayDifference limenHammer