Concept

Harpsichord — where it appears

A keyboard instrument whose strings are plucked by quills rather than struck. Its wire is long, thin and near the breaking strength of iron, which makes it an order of magnitude less stiff than a piano's and is why its plucking point is audible where a piano's strike point is not.

Named by 4 essays across 2 fields — each of them below, with the objects they name alongside it.

$Where each exciter's contact corner sits against its comb. The merger's four corners, drawn for three exciters. The comb is the strike point and is a horizontal line, because it is a fraction of the string and has no pitch in it. The contact corner is the exciter's, and it falls up the compass because the contact time is a fixed number of milliseconds against a shrinking period. Where they cross, the binding term changes. piano hammer crosses at E3; harpsichord plectrum crosses nowhere in the compass; dulcimer beater crosses at A5. So the crossing found earlier is not a fact about pianos. It is a fact about compliance: a felt hammer stays on the string for about 1.6 milliseconds and a plectrum for 0.05, and a difference of that size is a corner in a different place.$

The crossing belongs to the felt

On a piano the strike point decides the top of the spectrum below E3 and the hammer's contact decides it above. The merger's own bookkeeping asked whether that crossing is a fact about pianos or about hammers. A plectrum never crosses at all and a hard beater crosses two octaves higher, and the boundary is a contact time of about an eighth of a millisecond — ten times shorter than felt.

timbre · Excitation point

Three instruments, three wires, and an order of magnitude between them. The inharmonicity coefficient of each instrument's own string design, across its own compass. At middle-of-the-keyboard C a piano's wire is 315 millimetres long and 1.02 thick and gives B = 1.5e-3; a harpsichord's at the same pitch is 355 millimetres and 0.30, and gives 8.1e-5 — a factor of 19. The harpsichord's line is nearly flat across four octaves because its scaling is Pythagorean: the length doubles for every octave down, exactly, until the case runs out. The piano's is a V, because its case runs out two octaves earlier and everything below the break is a compromise. Every column before now used the top line for all three instruments.

Three exciters and three wires

Every column drawn so far has run a plectrum and a beater on a piano's string, because a piano's was the only scaling to hand. A harpsichord's wire is an order of magnitude less stiff, for a reason that turns out to be the tensile strength of iron — and with all nine combinations computed, the crossing found before stays exactly where it was, on every wire.

instruments · Excitation point $A plucking point 50 millimetres from the nut, across a harpsichord's compass. The jacks stand in a rail and the rail is one object, so a register plucks at a fixed distance from the nut while the strings shorten by a factor of ten from the bass to the treble. At 50 millimetres that is one 36th of the string at C2 and one 3.5th at C6 — a plucking fraction that changes by a factor of 10.1 without the maker moving anything. The comb corner is one over that fraction and falls with it, from 36 to 3.5; the dispersion corner has the fraction under a cube root and falls only from 106 to 21. They never meet. Setting one over p equal to the cube root of two over three times the inharmonicity and the fraction gives a plucking point at p = √(1.5B), which on this instrument's iron wire is between 3.4 and 9.9 millimetres from the nut — nearer to it than any register a harpsichord has ever carried, the lute stop included. So the maker's one free choice is the binding term at every pitch and every register position, which is exactly what the piano's is not: on a piano the contact time takes the decision away above E3.$

What the second register is for

Nine earlier essays take the plucking fraction as given — an eighth, a sixth, a seventh — and a harpsichord's jacks stand in a rail, so what is given is a distance and the fraction is a consequence: 50 millimetres is one thirty-sixth of the string in the bass and one three-and-a-halfth in the treble. Engage two registers on one string and the amplitudes add exactly, the near one fills the far one's missing partials, the pair digs holes of its own that neither has, and the combination comes out louder and rounder than either — including the bright one.

instruments · Excitation point

Two registers 50 microseconds apart on one string. The partials of a 355-millimetre string plucked at 32 and 50 millimetres from the nut, drawn twice: once with the two quills releasing together, once with the far one releasing 0.05 milliseconds later, which is 0.026 of this string's period. A delayed release turns partial n through 2·pi·f_n·dt, so the rotation is proportional to the partial number: the fundamental is turned 9 degrees and partial 24 is turned 226. Simultaneous, the pair is missing partials 17 and 20 — holes it digs for itself where the two combs are equal and opposite. Staggered, it is missing none of them: a rotation of anything at all takes two amplitudes out of opposition. The partials neither comb can excite at all — 7, 11, 22 — are filled either way, because where one comb is zero the sum is the other one whatever its phase. The fundamental's gain over the far register alone falls from 4.36 decibels to 4.34.

The interval between two quills

Two jacks on one key are voiced separately and do not let go at the same instant. That interval turns each partial of the later pluck through an angle proportional to its number — so it leaves the fundamental alone and inverts the twentieth partial, and the holes the pair digs for itself vanish at a hundredth of a period. What a regulator can tolerate turns out to be one fixed fraction of a period at every pitch, which on a five-octave instrument is a factor of sixteen in milliseconds.

instruments · Excitation point

Named alongside it

The objects these essays reach for when they reach for this one.

Excitation point Inharmonicity Spectral centroid Dispersion Hammer Partial Piano Register Spectrum Stiffness Brightness Phase

All concepts